Bresser WEATHER CENTER, Instruction Manual

Page: 59 / 200

59
Activating/Deactivating the Temperature Alerts
1. In Temperature and Humidity Mode, each press of ALARM/CHART rotates channel
temperature display between:
- Current Temperature for corresponding channel
- Upper Temperature Alert (displays OFF if deactivated): icon displayed
- Lower Temperature Alert (displays OFF if deactivated):
icon displayed
2. When the above alerts are displayed, pressing UP or DOWN will activate/deactivate the
corresponding
alert.
Setting up the Temperature Alerts
1. In Temperature and Humidity Mode, press ALARM/CHART to select alarm which you wish to
confi gure.
2. Press and hold ALARM/CHART until channel temperature and
or icon starts fl ashing in
the display.
3. Set Value for Temperature Alert:
Press
UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARM/CHART to confi rm your selection.
4. Upon completion the display will be returned to the temperature alert selection screen.
Disabling when Temperature Alarms are Activated
To Disable Temperature Alarm(s):
Press ALARM/CHART to disable the alarm (s).
Viewing the Max/Min Channel Temperature and Humidity
In Temperature and Humidity Mode, each press of MEMORY rotates channel temperature and
humidity display between:
- Current temperature and humidity at remote sensor
- Minimum temperature and humidity at remote sensor
- Maximum temperature and humidity at remote sensor
Resetting the Max/Min Channel Temperature and Humidity Memory
In Temperature and Humidity Mode, press and hold MEMORY to clear memory for all channels.
Remote Sensor Status
The wave icon above the current channel display shows the connection status of the corresponding
remote sensor:
Icon Status
Searching for remote sensor signals
Corresponding remote sensor successfully linked
No signals received for more than 15 minutes
(Blinks)
GB/IE