34 / 40
2.
Digits to be set are flashing.
3.
Press UP or DOWN button to change the value.
4.
Press ALARM button to confirm and continue to the
next setting.
5.
Settings order: Hours > Minutes
6.
Finally press the ALARM button to save the settings
and exit the setting mode. Alarm will be activated auto-
matically. The symbol will be displayed.
7.
Press ALARM button in normal display mode to display
the alarm time.
8.
Press ALARM button during the alarm time display to
disable the alarm.
13 Snooze function
1.
When the alarm sounds, press SNOOZE button to ac-
tivate the snooze function. The alarm will sound again
in 5 minutes.
2.
Press ALARM button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
3.
The alarm will be turned off automatically if no button is
pressed within 2 minutes.
14 Receiving measurements
automatically
Once batteries are installed, the base station will display the
indoor temperature readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
