33 / 40
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1.
Press RCC button at the base station for approx. 2
seconds to initialize the radio signal reception again.
2.
If the device is still not receiving the signal, the time
must be set manually.
Read the detailed manual for more information about
manual time and alarm setting (see download information
on page 2).
11 Manual time setting
1.
Press and hold TIME SET button for approx. 3 seconds
to change to time setting mode.
2.
Digits to be set are flashing.
3.
Press MEM / DOWN or CH / UP button to change the
value.
4.
Press TIME SET button to confirm and continue to the
next setting.
5.
Settings order: 12/24 hours mode > Hours > Minutes >
Seconds > Time offset
6.
Finally press the TIME SET button to save the settings
and exit the setting mode.
12 Alarm setting
1.
Press and hold ALARM button for approx. 3 seconds to
enter the alarm time setting mode.
