38
Setting up the time, date and language
1. In clock and alarm mode, press and hold
SET
to enter clock and calendar setup.
2. The day of week should start fl ashing in the display.
Set
language:
Press
[
▲
]
or
[
▼
]
to select language for day of week: English, German, French, Italian, Spanish or
Dutch.
3. Select city code:
Press
[
▲
]
or
[
▼
]
to select city code for your local area.
Press
SET
to confi rm your selection.
4. If USR was chosen for city code, set degree for latitude:
You will be asked to enter your latitude in degrees (º).
Press
[
▲
]
or
[
▼
]
to adjust value. Press and hold either button for fast advance.
Press
SET
to confi rm your selection. Repeat above procedure to set minutes and seconds for
latitude, degrees for longitude, minutes for longitude and seconds for longitude.
5. If USR was chosen for city code, set time zone:
Press
[
▲
]
or
[
▼
]
to adjust value in increments of 30 minutes. Press and hold either button for fast
advance. Press
SET
to confi rm your selection.
6. If USR was chosen for city code or city is in a DST zone, set daylight saving time option:
Press
[
▲
]
or
[
▼
]
to turn DST option on or off. Press and hold either button for fast advance.
Press
SET
to confi rm your selection.
7. Repeat the above instructions to set year, month, day, calendar display format (day/month or
month/day), time display format (12 hr/24 hr), local hour and local minutes.
8. Upon completion the display will return to normal clock and alarm mode.
Note:
Press and hold
SET
anytime during the setup to return to normal clock and alarm mode. All settings
made will be discarded.
Rotating between different clock/calendar displays
In clock and alarm mode, each press of SET rotates clock display between...
• Hour: Minute: Weekday
• Hour: Minute for UTC (Coordinated Universal Time)
• Hour: Minute: City
• Hour: Minute: Second
• Month: Day: Year (or Day: Month: Year)
Activating/deactivating the time alarms
1. In clock and alarm mode, each press of
ALARM/CHART
rotates clock display between...
• Weekday alarm time (displays ‘OFF’ if weekday alarm deactivated)
• Single alarm time (displays ‘OFF’ if single alarm deactivated)
• Pre-alarm time (displays ‘OFF’ if pre-alarm deactivated)
2. When the above alarms are displayed, pressing
[
▲
]
or
[
▼
]
will activate/deactivate the corre-
sponding alarm.
Note:
Press
SET
anytime during alarm selection mode to return to normal clock display.
