17 / 20
8 Establishing the power supply (Battery
operation, optional)
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.
9 Manual time setting
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next setting.
5. Settings order: Hour > Minute > 12/24 hour time mode
6. Finally press the MODE button to save the settings and exit the setting mode.
10 Alarm setting
1. Press and hold ALARM button for approx. 3 seconds to enter the alarm time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press ALARM button to confirm and continue to the next setting.
5. SeSettings order: Hours > Minutes > Snooze interval (05-60 minutes)
6. Finally press the ALARM button to save the settings and exit the setting mode. Alarm will be activ-
ated automatically. The symbol
"AL"
will be displayed.
7. In normal display mode, press the ALARM button to activate or deactivate the ALARM. The sym-
bol
"AL"
will be displayed.
11 Night mode
1. In Night mode, the display brightness is automatically reduced at the time you specify.
2. Press the MODE button 2x to enter the night mode settings.
3. Press UP or DOWN button to activate or deactivate.
4. Immediately after activation, press and hold the MODE button for approx. 3 seconds to change the
interval (default interval: 6 p.m. to 6 a.m.).
12 Temperature display
1. Press the MODE button once, to enter the temperature display settings.
2. Press DOWN button to switch between °C and °F.
3. Press and hold MODE button for approx. 3 seconds, until you hear the signal sound, to activate
the automatic display change of Temperature (5 seconds) > Time (10 seconds).
4. Press and hold MODE button again for approx. 3 seconds to deactivate the automatic display
change.
13 Display brightness regulation
• Press the UP button to adjust the brightness of the LED display in 2 steps.
