19 / 32
8 Mould alert
1.
In normal display mode, touch the C/F touch button for
approx. 3 seconds to switch to mould alert settings
mode. MOULD ALERT and humidity display will flash.
2.
Touch the C.F/UP or MAX.MIN/DOWN touch button to
set the desired value. Possible values: 60%, 65%, 70%
or 75%.
3.
Touch C/F touch button again for approx. 3 seconds to
save the settings. Mould alert will be triggered if the hu-
midity will reach the set value.
4.
MOULD ALERT information will flash until the humidity
drops below the set value again.
9 Humidity alert
1.
In normal display mode, touch the SET/DEW POINT
touch button for approx. 3 seconds to switch to humid-
ity alert settings mode. Humidity upper limit display will
flash.
2.
Touch C.F/DOWN or MAX.MIN/UP touch button to set
the desired value.
3.
Touch SET/DEW POINT touch button to switch to hu-
midity lower limit setting.
4.
Touch the C.F/UP or MAX.MIN/DOWN touch button to
set the desired value.
5.
Finally touch the SET/DEW POINT touch button to exit
settings mode.
6.
Touch the ON/OFF touch button to activate humidity
alert. ALERT will be displayed on the screen.
7.
Touch the ON/OFF touch button again to disable the
humidity alert. ALERT will not be displayed.
