20 / 56
• RELATIVE: the relative atmospheric pressure based on
the sea level.
Set relative atmospheric pressure value
5. Get the atmospheric pressure data of the sea level (it is
also the relative atmospheric pressure data of your
home area) through the local weather service, internet
and other channels.
6. Hold the BARO button for approx. 3 seconds, until AB-
SOLUTE or RELATIVE flashes.
7. Press the +/CHANNEL or -/MEM button to switch to REL-
ATIVE mode.
8. Press the BARO button again, and the number for REL-
ATIVE flashes.
9. Press +/CHANNEL or -/MEM button to change the value.
10. Press the BARO button to save and exit the setting
mode.
NOTE
11. The default relative atmospheric pressure value is 1013
mb/hPa (29.91 inHg), which refers to the average atmo-
spheric pressure.
12. When you change the relative atmospheric pressure
value, the weather indicators will change along with it.
13. The built-in barometer can notice the environmental
absolute atmospheric pressure changes. Based on the
data collected, it can predict the weather conditions in
the forthcoming 12 hours. Therefore, the weather in-
dicators will change according to the detected absolute
atmospheric pressure after you operate the clock for 1
hour.
Summary of Contents for ClimaTrend Life
