Bresser ClimaTrend Life, Instruction Manual

Page: 13 / 56

13 / 56
Though the remote unit is weather proof, it should be
placed away from direct sunlight, rain or snow.
8 Power supply
Base unit
1. Insert the DC plug into the connection socket on the
base unit.
2. Insert the Euro plug into the mains power socket.
3. The device is powered on directly.
4. Wait until indoor temperature is displayed on the base
unit.
NOTICE! For permanent operation, mains power supply
is recommended. Alternatively, operation using batter-
ies is also possible to maintain the time setting in the
event of a power failure. In battery operation, the sta-
tion is set to power saving mode after 6 seconds and
the display indication is deactivated. The display can be
reactivated by pressing the snooze button.
For battery operation, proceed as follows:
5. Remove the battery compartment cover.
6. Insert batteries into the battery compartment. Make
sure that the batteries are correctly aligned (+/- poles).
7. Replace the battery compartment cover.
8. Wait until indoor temperature is displayed on the base
unit.
NOTICE! When changing the type of power supply
(mains power or batteries), the power supply is tem-
porarily interrupted for technical reasons. All previ-
ously made settings will be lost.
Wireless sensor
9. Remove the battery compartment cover.