Bresser 9621600, Instruction Manual

Page: 3 / 8

3
EN
GENERAL SAFETY INFORMATIONS!
RISK of physical injury!
Never look through this device directly at
or near the sun. There is a risk of BLIN-
DING YOURSELF!
Children should only use this device un-
der supervision. Keep packaging materi-
als (plastic bags, rubber bands, etc.) away
from children. There is a risk of SUFFOCA-
TION.
Fire/Burning RISK!
Never subject the device - especially the
lenses - to direct sunlight. Light ray con-
centration can cause fires and/or burns.
RISK of material damage!
Never take the device apart. Please con-
sult your dealer if there are any defects.
The dealer will contact our service centre
and send the device in for repair if nee-
ded.
Do not subject the device to temperatu-
res exceeding 60° C!
List of Parts
B
Centre axle
C
Rubber eyecups

Tripod connection cap
E
Body of the binoculars
F
Lens tube

Individual eyepiece adjustment
H
Eyepiece
I
Objective lens
J
Threaded tripod connection
1)
Image circle with correctly set eye dis-
tance
Eyepieces for spectacle wearers
To use the binoculars while wearing glas-
ses, turn the rubber eyecups (2) towards
the sides and down. If you are not wea-
ring glasses, leave the eyecups in the
upright position to achieve the required
distance from the pupils.
Adjusting the eyepiece distance
The distance between the eyes differs
between individuals. To achieve perfect
interaction between your eyes and the
eyepieces of your binoculars set the ang-
le at the centre of the binoculars (1) so
that you see a circular image (10). Note
this setting for later use.
Adjusting the focus
Your binoculars have single eyepiece ad-
justment (6) means. To focus look at an
object approximately 100 meters away.
Close only your left eye and keep turning
the right eyepiece setting ring 1 until the
object looked at is in sharp focus. Then
close only your right eye and turn the left
eyepiece setting 1 until the object you are
looking at is again in sharp focus. The
binoculars are now precisely adjusted to
your eyesight.
The single eyepiece setting (6) is desig-
ned to give you better perspective. When
switching between objects of varying dis-
tance the focus need only be readjusted
if the change in distance is really major.
Mounting the binoculars on a tripod
Remove the tripod connection cap (3) to
access the threaded tripod connection
(9). Then screw on the tripod adapter.
You can use this to mount your binocu-
lars on the included tripod.