27
TIME & CALENDAR
1. Date
2. Time
3. RCC signal strength indicator
4. DST
5. Alarm
6. Moon phase
7. Day of the week
RADIO CONTROLLED / ATOMIC CLOCK FUNCTION
When the unit receives RCC signal, a sync-time symbol will appear on the LCD, and synchronizes daily.
SIGNAL STRENGTH INDICATOR
The signal indicator shows signal receive status. Flashing wave
segment means RCC signals are being received. The signal
receiving status could be classified into 2 types:
No signal quality Received RCC signal
NOTE:
- Everyday the unit will automatically search for the time signal at 2:00am, 8:00am, 2:00pm and 8:00pm
-
The strength of radio-controlled time signal from the transmitter tower may be affected by geographical
location or building around.
- Always place the console away from interfering sources such as TV set, computer, etc.
- Avoid placing the console on or next to metal plates.
- The console can more easy to received the signal, if the distance between console and the adapter is 1m or
more.
- Closed areas such as airport, basement, tower block, or factory are not recommended.
TIME SETTING
The unit automatically set itself accordingly to the Radio Controlled Clock signal it received. To set the clock/
calendar manually, first permanently disable the reception by holding the RCC key for 8 seconds (Press RCC
key for 8 seconds again to enable the RCC reception).
TO MANUALLY SET THE CLOCK / TIME ZONE SELECTION
1. Press and hold
[ TIME SET ]
key
for 2 seconds until
12
or
24 Hr
flashes.
2. Use
[ UP ]
or [
DOWN ] key
to adjust, and press
[ TIME SET ]
key
to proceed to the next setting.
3. Press
[ TIME SET ]
key
again to step the setting items in this sequence: 12/24 Hour format
Hour
Minute
Second
Year
Month
Day
Hour offset
Weekday Language
DST
AUTO / OFF.
NOTE:
- The unit will automatically exit setting mode if no key was pressed in 60 seconds.
-
DST
(Daylight Saving Time) feature is set to Auto (factory set). The clock has been programmed to
automatically switch when the daylight saving time is in effect.
- DST feature only valid when RCC function is on.
SETTING ALARM TIME
1. In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit flashes to enter
alarm time setting mode.
2. Press
[ UP ]
or
[ DOWN ]
key to change the value. Press and hold the key for quick-adjust.
3. Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4. Press
[ UP ]
or
[ DOWN ]
ke
y to adjust the value of the flashing digit.
5. Press
[ ALARM ]
key to save and exit the setting.
NOTE:
- In alarm mode, the “ ” icon will display on the LCD.
- The alarm function will turn on automatically once you set the alarm time.
Summary of Contents for 7003100 000 000
Page 21: ...21...
