22 / 60
HI/LO alert setting
1.
Press ALERT button until the desired area is selected.
2.
Press UP or DOWN button to change the value.
3.
Press ALERT button to confirm and continue to the
next setting.
Enable/Disable HI/LO Alert
4.
Press ALERT button until the desired area is selected.
5.
Press ALARM button, to activate the alarm.
6.
Press ALERT button to confirm and continue to the
next setting.
Note:
7.
The unit will automatically exit setting mode in 5
seconds if no button is pressed.
8.
When ALERT alarm is on, the area and type of alarm
that triggered the alarm will be flashing and the alarm
will sound for 2 minutes.
9.
Press SNOOZE/LIGHT button when alarm sounds to
interrupt the alarm. The alarm will then start again after
2 minutes.
Data clearing
10. Press and hold HISTORY button for approx. 3 seconds.
11. Press UP or DOWN button to choose YES or NO.
12. Press HISTORY button to confirm. This will clear out
any rainfall data recorded before.
