16 / 60
Windmeter
5.
Unscrew the upper housing part from the bottom part.
6.
Remove the battery compartment cover from the bot-
tom of the upper housing part.
7.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
8.
Replace the battery compartment cover.
9.
Screw bottom housing part to upper housing part.
11 Attaching rubber linings
Attach the supplied self-adhesive rubber pads to the clamps
as shown to ensure a firmer fitting of the mounting rod.
12 Windmeter installation and
mounting
Depending on the desired location, the remote sensor can
be installed in different ways.
