Bresser 70-50200, Instruction Manual

Page: 34 / 52

34
Start-up the transmitter-receiver communication
• It is important to power-up the main unit BEFORE
powering-up the remote sensor. Immediately after
batteries are installed, the remote sensor will start
transmitting data to the main unit.
The main unit will start receiving the data after the
batteries have been installed.
• It is recommended to power up and test communication
between the remote sensor and the main unit BEFORE
permanently mounting the sensor outside.
• During initial set up, place the remote sensor next to
the main unit. Make sure, both receiver and transmitter
are placed far from any disturbing sources.
• After reception is established (remote readings will
appear on the main unit’s display), position the remote
sensor and the main unit within the maximum trans-
mission range of up to 30 meters (100 feet).
NoTE:
• Avoid pressing any button on the main unit before
the remote readings are displayed.
• Transmission or reception range may be affected by
trees, metal structures, electronic appliances,
surrounding building materials and how the main unit
and transmitter are positioned.
Placement of sensor and main unit
• Place the remote sensor so that it faces the main unit
(receiver), minimizing obstructions such as doors, walls
and furniture.