25
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
4.3.12 AIR QUALITY
Air quality section shows the visibility distance according to the device location input in PWL. If
you have optional PM2.5/10 sensor(s), you can also view the corresponding data in this section.
4.3.12.1 VISIBILITY MODE
Air visibility is measured in distance (either in km or miles),
and is generally refer to the distance at which an object or light
can be clearly discerned, and it depends on the transparency
of the surrounding air. Visibility range can reach over 50km on
exceptionally clear day, down to under 1km on hazy day.
If the WI-FI connectivity is not stable for over 3 hours, the air
visibility will not be shown, and the
icon will disappear.
4.3.12.2 PM2.5/10 MODE (OPTIONAL SENSOR)
This console supports up to 4 optional PM2.5 /10 sensors
for you to detect different area's air quality. If you paired this
sensor, you can press the
[ AIR QUALITY ]
key to check the
readings in the following display sequence: Visibility CH1
CH2 CH3 CH4 PM2.5/10 sensor's reading.
4.3.12.3 ACTIVATE THE AUTO LOOP IN AIR QUALITY SECTION
NOTE:
To use the auto-loop function, two or more outdoor / wireless sensors must be connected.
To activate the auto-loop function in this section, just press and hold the
[AIR QUALITY]
key for
2 seconds and the icon will show near the CH number and display the connected channels'
reading at 4 seconds interval.
4.3.12.4 VIEW DIFFERENT READING OF PM2.5 / 10
The PM2.5 /10 sensor has default display in PM2.5. However, user may press
[ UNIT ]
key to
change readings in the following display sequence: PM2.5 PM10 PM2.5 AQI PM10
AQI.
NOTE:
The PM2.5 / 10 sensor is optional sensor, which is not included.
4.3.13 SKY CONDITION
Sky condition section show the % of cloud cover according to the device location input in PWL. If
you have optional lightning sensor, you can also view the lightnings detected instantly.
