49
2.4.3 RAIN MODE
• Precipitation amount for last hour, last 24 hour, yesterday, last week and last month
• Rainfall alert
2.4.4 WIND MODE
• Wind Chill
• Temperature at place of anemometer
• Wind direction
• Wind speed
• Wind gust
• Alert for wind speed and wind gust speed
CUSTOMIZING YOUR WEATHER STATION
To fully customize the weather station to your local settings and personal preferences, the
following settings are required. Please refer to the appropriate sections for detailed instructions
as below.
REQUIRED:
• Setting Pressure Parameters during Initial Start-Up (Pressure Mode)
OPTIONAL:
• Setting up the Temperature Alerts (Temperature and Humidity Mode)
• Setting up the Daily Rainfall Alerts (Rain Mode)
• Setting up the Wind Alerts (Winds Mode)
2.5 SETTING PRESSURE PARAMETERS DURING INITIAL START-UP
This part of the display indicates the current pressure, sea level pressure, and moon phase.
A number of historical statistics can also be viewed, such as the sea-level pressure values for
the last 24 hours, moon phase for the previous and next 39 days, as well as a pressure/
temperature/ humidity history bar-chart.
Pressure values may be displayed inHg, hPa/mBar or mmHg, and altitude values may be
displayed in meters or feet.
ACCESSING PRESSURE AND WEATHER FORECAST MODE
From the main console unit: [ ] or [ ]until the weather forecast icon
starts flashing.
SETTING PRESSURE PARAMETERS DURING INITIAL START-UP
During the initial start-up of the Main Unit, the pressure settings should be configured in
following steps.
1. Choose Pressure Units:
The unit icon “inHg” or “mmHg” or “hPa/mBar” should be flashing. [ ] or [ ] to select
pressure unit as inHg, hPa/mBar or mmHg
Press [ SET ] to confirm your selection.
2. Choose Altitude Units:
Press [ ] or [ ] to select altitude unit as feet or meters.
Press [ SET ] to confirm your selection.
3. Set Altitude:
[ ] or [ ]to adjust value. Press and hold either button for fast advance.
Press [ SET ] to confirm your selection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Note: After initial start-up the altitude cannot be adjusted immediately
VIEWING PRESSURE AND ALTITUDE DATA
In Pressure Mode, each press of [ SET ] rotates display between:
• Sea level pressure
• Local pressure
• Local altitude
SETTING THE SEA LEVEL PRESSURE
1. In Pressure Mode, press [ SET ] until the sea level pressure is displayed.
2. Press and hold [ SET ]. The Sea Level Pressure display should be flashing.
3. Set Sea Level Pressure:
[ ] or [ ] to adjust value. Press and hold either button for fast advance.
Press [ SET ] to confirm your selection.
4. Upon completion the display will be returned to Pressure Mode.
