4
BATTERY INSERTION
1.
Unscrew and remove the battery door of sensor with a screwdriver.
2.
Insert the 3 rechargeable batteries (included) into the battery compartment in the
following order:
3
1
2
x 3
3.
Screw the battery door compartment on tightly.
4.
After inserting batteries, all LCD segment will be shown for 1 second.
GETTING STARTED
1.
Slide
[ CHANNEL ]
to set the channel number for your sensor(s).
2.
Use a pin to press
[ RESET ]
key for run the channel number.
Note:
- If there are more than one sensor in use, ensure to assign different channel numbers for each sensor to enable
the measurement is displayed correctly on the console.
LCD DISPLAY
1.
PM2.5 / PM10 display mode
2.
PM2.5 / PM10 concentration value
3.
PM2.5 / PM10 concentration level
4.
Sensor Wireless channel number
5.
Transmission signal
6.
Battery power indicator
1
2
3
4
6
5
