10
- To reconnect, move the sensor closer to the display console, or press [ SENSOR ] for the display console to enter
signal searching mode.
TIME SETTING
The time on the display console can be set manually or synchronized to local time with reception of the radio-
controlled signal.
RECEPTION OF RADIO CONTROLLED SIGNAL
The clock can automatically synchronize its time with the time signal transmitted from Germany (DCF77) or UK
(MSF).
When used for the first time (after inserting the batteries or pressing the
[ RESET ]
key), the clock will start to receive
the RCC signal after 5 minutes with the signal indicator flashing. You can also press
[ RCC ]
key to receive the RC signal
once.
RCC SIGNAL INDICATOR
The signal indicator shows the reception quality of the radio-signal as shown below:
No RCC signal received
Receiving RCC signal
Received RCC signal
Note:
- Every day the wireless sensor will automatically search for the time signal at 2:00, 3:00, 4:00 and 17:00.
- Always place the unit away from interfering sources such as TV set, computer, etc.
- Avoid placing the unit on or next to metal plate.
- Closed area such as airport basement, tower block or factory is not recommended.
- Do not start reception on a moving article such as vehicle or train.
- User can permanent disable or enable the RC function by press and hold the [ RCC ] key for 8 seconds.
DISABLE/ENABLE RCC SIGNAL RECEPTION
1.
Press
[RCC]
to disable the reception.
2.
Press
[RCC]
to enable automatic RCC reception.
RCC on
RCC off
DAYLIGHT SAVING TIME (DST)
This clock has been programmed to automatically switch when the daylight saving time is in effect. User can disable
the DST function in time and calendar setting mode.
Note:
DST AUTO/OFF setting only available when RCC function is ON.
MANUALLY TIME SETTING / TIME ZONE SELECTION
1.
In normal mode, press and hold
[ ]
key for 2 seconds to enter date and time setting mode.
2.
Press
[ ] or [ / CH ]
key to adjust the setting.
3.
Press
[ ]
key to enter the next setting.
4.
The setting sequence: 12/24 format
hour
minute
± 23 Hour offset
°C / °F
DST AUTO/
OFF
5.
Press
[ ]
key or leave the unit for 60 seconds to complete the setting and return to normal mode.
