40
3.4.2 View images or videos
In ON mode connect the camera with a computer using
the supplied USB cable. The device will be shown as a
fl ash drive and you can easily start viewing images on the
computer’s screen.
3.5 Power off
Switch the ON/OFF lever to OFF position to power off
the camera. Please note that even in the OFF mode, the
camera still consumes certain power at μA level. There-
fore, please remove the battery if the camera will not be
used for a long time.
4. Advanced operations
From the basic operations of the camera in the previous
chapter, we know that the camera has three basic
operation modes:
1.
OFF Mode:
Power switch is in OFF position.
2.
ON Mode:
Power switch is in ON position.
3.
TEST Mode:
Power switch is in “SETUP”
position
The OFF mode is the specifi ed safe mode for replacing
the SD-card or batteries and transporting the camera.
ATTENTION:
Replace SD-card only in OFF mode!
4.1 Settings
To make any specifi c settings, an SD-card must be
inserted. Then, change into the TEST mode explained
before.
Below the display are the function keys with the fol-
lowing functions:
• Press the menu key to switch between status mode
or Setup mode.
• In Status mode, the OK button is used to manually
take photos or videos, in the setup mode, confi rm
the setting by pressing the OK button.
• In the setup mode the keys or used to select
sub-menus, set values for date / time value and to
check the MCU / DSP fi rmware version
• The keys or can be used to Date / Time Select
the Setup menu.
