37
EN
2. Caution!
• The working voltage of the camera is 12V. The camera
is supplied by 8 AA batteries*.
• Please install batteries according to shown polarity.
• For camera operation an SD-card* (up to 32 GB) is
needed.
• Please unlock the write-protect before inserting the
SD-card.
• Please insert the SD-card when the power switch is at
OFF
position before testing the camera. The camera
has no internal memory for saving images or videos.
• Please do not insert or take out the SD-card when the
power switch is at
ON
position.
• It is recommended to use the camera to format the
SD-card when used for the fi rst time.
• The camera will be in USB mode when connected to
a USB port of a computer. In this case, the SD-card
functions as a removable disk.
• In the
TEST
mode, the camera will shut down automa-
tically after 3 minutes if no operation is done. Please
turn on the power again if you want to continue to work
with the camera.
• Please ensure suffi cient power when having fi rmwa-
re upgrade, otherwise the upgrade process could be
*not included with your purchase
interrupted incorrectly. If any fault occurs after impro-
per upgrading process, the camera may stop function
properly.
