Bresser 12MP GAME CAMERA, Instruction Manual

Page: 62 / 100

62
1.7 Supported formats
Which file system you use for your SD-card is normally
not relevant, however one can experience difficulties
reading data from the card. In this situation please format
the card again either in the camera or on your computer
and it’s ready for use.
Item Format
Image JPG
Video AVI
File format FAT32
2. Important Safety Instructions!
• The camera cannot be not turned on when no SD card
is inserted.
• The working voltage of the camera is 6V. The camera
is supplied with 2 x 4 AA type batteries.
• Please install batteries according to polarity displayed.
• For camera operation an SD-card (8 MB to 32 GB) is
necessary.
• Please unlock the write-protection function before in-
serting the SD-card.
• Please insert the SD-card before testing the camera
and ensure the power switch is at the OFF position.
The camera has no internal memory for saving images
or videos.
• Do not insert or remove the SD-card or SIM-card* when
the power switch is at the “SETUP” or ON position.
• ）When first in use it is recommended to format the SD-
card via the camera.
• The camera switches to USB mode when the device
is connected to a computer using a USB cable and
the camera is in test mode. (Main switch is in „SETUP“
position).
• In the TEST mode the camera shuts down automati-
cally after 3 minutes if not in use. In this situation it’s
necessary to switch the power back on in order to
continue working with the remote control.
• The red filter in front of the lens moves automatically
when needed. It might seem to have no real function
the way it hangs halfway over the lens. However, this
is not a camera defect as long as the image quality
remains unaffected.
*not included with your purchase