Attention:
In case of problem with connection between the main unit and remote control, you can perform joint
encoding operation:
Turn the remote control off, and push the power switch of the main unit to level “O”.
Press and hold [8] encoding key of the main unit. While still holding it, push the power switch
of the main unit to level “I” to turn it on. The blue LED indicator on the front of the main unit
flashes.
1.
2.
3.
and
Release [8] encoding key, and simultaneously press the
keys of the remote control
for 2-3 seconds.The remote control LCD lights up while the main unit’s blue LED indicator
turns off -- it means the encoding is successful (This step should be completed within 6
seconds). If unsuccessful, repeat from the start.
Please make sure that one main unit is corresponding to one remote controller. The operation of
encoding joint with multiply remote controller to the main unit is prohibited.
Important: Make sure that only one device is paired with the remote control. Multiple pairing of remote
control and main unit is strictly prohibited.
Push the power switch of the main unit to level “0”, then back to level “1”. Both the main unit
and remote control should now be working.
5
Preparation
No damage on power charger
Battery power is sufficient
1.
2.
Prior to use, check the integrity of the machine and accessories.
