Breo i Neck air 2, Manual

Page: 10 / 78

Correct usage
The product should not be used while charging. After
charging, unplug the power adapter before using the
product.
1 Long press the Power On/Off button to power on the
product.
The main unit produces a "beep" sound; then the light indicator
on the control panel comes on; MODE 1 is activated by default,
and the Hot Compress function is enabled
2 As per your own need, you can select your favorite massage
mode by pressing the Power On/Off and Mode buttons.
Upon startup, short press the Power On/Off button to
separately disable or enable the Hot Compress function
Upon startup, short press the Mode button to select among
the following three modes
MODE 1 The total time is 10min;
massage is enabled; the massage rotation direction is
changed at a fixed time.
MODE 2 The total time is 10min;
massage is enabled; the massage head is retrieved at a fixed
EN time and is extended again for massage after a short interval.
The total time is 30min;
massage is disabled; the massage head is retrieved.
3 Wear the product at your neck. When using the product,
please relax your neck and shoulders, lean back in the chair
and totally relax your body. Or pull down the pull strap
buckles to control the pressure exerted by the massage head
on the neck.
4 A long "beep" sound will be heard after use for 15min or
30min; then the light indicator on the control panel goes out,
and power supply is cut off automatically.
5 How to manually cut off power supply:
Long press the Power On/Off button for over 2s; when a long
"beep" sound is heard, power supply is cut off automatically.
6 After use
Press the button in the middle of the pull strap buckles to
separate the buckles; hold the two ends of the main unit by
both hands to remove the main unit.
※2. Please observe the neck and skin changes when the
product is used for the first time or by those with sensitive skin
19 20