5
Before First Use
IMPORTANT:
Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
1.
Use the lowest temperatures with fabrics that have unusual finishes such
as sequins, embroidery, flush, etc…
2.
We recommend passing the iron over an ordinary cloth before using it
for the first time.
3.
If the fabric is mixed, set the thermostat to the temperature of the fiber
requiring the lower temperature.
4.
If you do not know the composition of the fabric, try testing on a hidden
corner of the garment. Start with a low temperature and increase it
gradually until it reaches the ideal temperature.
5.
Never iron areas with traces of perspiration or other marks. The heat of
the plate fixes the stains on the fabric making them irremovable.
Attention:
First use may cause a slight odor or small smoking upon
heating, it is normal. This is a result of the heating element chemical
reaction. It quickly goes away.
Identifying your Garment:
GARMENT
LABEL
FABRIC
TYPE
THERMOSTAT
REGULATION
Synthetic
●
low temperature
Silk - Wool
●●
medium temperature
Cotton - Linen
●●●
high temperature
Fabric should not be ironed
Using Your Classic Steam Iron:
STEAM IRONING
Filling the Reservoir:
1.
Check that the plug is disconnected from the socket.
2.
Move the Temperature Control Dial to “OFF”.
3.
Raise the tip of the iron to help the water enter the opening without
overflowing.
Refill as needed
