Power Jet-Light 2 x 36 W IP 54
Operating Manual
15
Status: 7201S-07-2007_K
6.2 Change
Illuminant
DANGER:
Pull the mains plug before opening the work lamp!
Let the work lamp cool before contact (at least 15 minutes). Contact can lead to burns.
Step
Activity
Set the work lamp on its back. Press the rubber lip in the corner towards the bottom.
Pos.
Name
4
Protective cover
8
Rubber lip
1
2
Pull the protective cover from the corner.
Press the bolt downwards. Pull the illuminant from the socket.
Pos.
Name
5
Illuminant
7
Socket
17 Bolt
3
4
Insert the new illuminant with gentle pressure. The bolt locks in place and holds the
illuminant firm even during rough handling
5
Install the protective cover. For this purpose, press the rubber lip downwards and insert the
protective cover. Note the correct position of the seal between the casing and the protective
cover.
6.3
Install the work lamp
There are two possibilities of installing the work lamp
1. Possibility : In metal stands
2. Possibility: without metal stands
4
8
5
7
17
