Bremont SOLO-34, Technical Notes

Page: 6 / 80

CHANGING THE STRAP
REMOVING A STRAP
Use the end of your watch tool
to carefully remove the spring bar
out of the case lug. Pressure should
be applied to the side of the strap
to reveal the spring bar, allowing
access for the pronged end of
the tool to sit over the flange of
the spring bar. Carefully depress
the spring bar to allow it to be
removed from the case lug.
FITTING A STRAP
Place the end of the spring bar into
one hole of the case lug and use the
end of the watch tool to depress
the spring bar allowing the other
end to locate into the opposite
hole. Slowly release and ensure that
the spring bar locates correctly into
the hole of the case lug.