Bremont JAGUAR D-TYPE LIMITED EDITION, Technical Notes

Page: 9 / 88

SETTING THE DATE
You can adjust the date by pulling out the crown to position II . You will
now be able to change the date by rotating the crown clockwise.
Do not change the date between 20:00 and 03:00
SETTING THE TIME
Pull the crown out to position III , this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push the
crown back to position I. When setting the time, it is worth noting that
the date change always takes place at midnight (00:00). If this change has
already taken place at 12:00 noon, you must move the hands forward by 12
hours. Ensure that the crown is pushed back in after setting the watch.
USING THE TACHYMETER FUNCTION
The Tachymeter is used to measure the speed of an object which is
moving at a constant speed, and is read using a combination of the central
chronograph seconds hand and the tachymeter scale, over a maximum
duration of 60 seconds.
Start the timing operation using push button A and stop it again once the
object has covered a distance of 1 mile or 1 kilometre. When stopped the
chronograph hand will point at a numeral on the tachometer scale,