Bremmen Parts BMW E46 Android Touch Screen Radio Installation Instructions Manual Download Page 6

Page: 6 / 14

1000 SEVILLE RD. WADSWORTH, OH 44281

1.800.924.5172

WWW.ECSTUNING.COM

PAGE 6 OF 14

BMW E46 ANDROID TOUCH SCREEN RADIO INSTALLATION

Step #9

Step #10

Step #11

Step #12

• Remove the last two screws (arrows) securing the factory radio cage.

• Pull the cage out from the dash.

• Using a small hack saw, shears or other suitable cutting tool, trim away the excess dash

material (highlighted in

RED

). This will help the radio to sit flush against the dash once

installed.

• Grasp the upper storage bin and pull it forward to pop it free from the mounting bracket.

In order to install the new radio, we need to relocate the climate control panel to the lower

mounting bracket, If your vehicle has a factory navigation system, or your climate control panel

is already located in the lower mounting bracket, please skip to

step #1

page 11

Section 1: Removing the Stock Radio

Summary of Contents for BMW E46 Android Touch Screen Radio















Search results

Summary of Contents for BMW E46 Android Touch Screen Radio

Reviews:

Related manuals for BMW E46 Android Touch Screen Radio

Brands by name

Popular brands

Bremmen Parts BMW E46 Android Touch Screen Radio, Installation Instructions Manual

Search results

Summary of Contents for BMW E46 Android Touch Screen Radio

Reviews:

Related manuals for BMW E46 Android Touch Screen Radio

Brands by name

Popular brands