Bremmen Parts BMW E46 Android Touch Screen Radio Installation Instructions Manual Download Page 12

Page: 12 / 14

1000 SEVILLE RD. WADSWORTH, OH 44281

1.800.924.5172

WWW.ECSTUNING.COM

PAGE 12 OF 14

BMW E46 ANDROID TOUCH SCREEN RADIO INSTALLATION

Step #3

Step #4

Step #5

Step #6

• Install the included radio antenna adapter onto the factory radio antenna cable.

• Plug the black connector on the new wiring harness into the back of the new radio.

• Plug the radio antenna adapter into the back of the new radio.

• Install the new GPS antenna by doing the following:

Find a suitable location to mount the GPS antenna which is clear of obstacles that may

cause signal interference.

Mount the GPS antenna in the desired location using double-sided tape or the

integrated magnet.

Route the cable from the mounting location to the back of the new radio, removing

trim panels to tuck and secure the cable as needed.

Section 2: Installing the New Radio

Summary of Contents for BMW E46 Android Touch Screen Radio















Search results

Summary of Contents for BMW E46 Android Touch Screen Radio

Reviews:

Related manuals for BMW E46 Android Touch Screen Radio

Brands by name

Popular brands

Bremmen Parts BMW E46 Android Touch Screen Radio, Installation Instructions Manual

Search results

Summary of Contents for BMW E46 Android Touch Screen Radio

Reviews:

Related manuals for BMW E46 Android Touch Screen Radio

Brands by name

Popular brands