Page 3
Option B
2 sec.
2x P2
OR
Press 2 sec. on P1.
Press 2x on the
The LED flashes 5x.
Press the open or closed button
When LED flashes,
P2 button, within
and the transmitter is ready for use.
let go.
3 sec.
If the curtain is moving in the wrong direction, repeat the above procedure and then press close.
With the above action deletes all the channels in memory and the final adjustment.
______________________________________________________________________________
Step 2 Set or change preset position
If you press the Stop button longer than 3 sec., the motor will move to the preset position from any position.
1x P2
1x STOP
1x STOP
OK
Press 1x the P2
Press 1x stop button.
Press 1x stop button.
The position has now changed.
button.
The LED flashes.
The LED flashes.
To remove the preset position, you must go to the preset position and repeat above action.
_______________________________________________________________________________
Step 3 Delete transmitter
Deleting the transmitter can be done in three ways:
1.
When setting up the first channel also the limit setup will be removed.
2.
Press P1 button until the LED flashes 2x and blinked 1x.
3.
1x P2
1x 1x P2
OK
Press P2 button 1x.
Press close button.
Press P2 button 1x.
