Page 2
______________________________________________________________________________
Functions
Reach
L1 = 100 meter
L2 = 25 meter
|----------------------------
LED
|
|---------------------
P1 Programm button
-------------------------
Connection for switch
_______________________________________________________________________________
Installation motor and rail
Attach the rail to the wall / ceiling.
Mount the rail not vertical.
If the motor
don’t want to click easily, turn the gear wheel a bit and try again.
_______________________________________________________________________________
Charging the battery
When you use the battery for the first time, fully charge it. If the LED on the charger turns green, the battery is full.
Always use the charger type DC-216
_______________________________________________________________________________
Step 1 Setting up the first channel
Option A
1x P2
1x P2
OR
Turn the motor on.
Press 1x on the
Press 1x on the
Press the open or closed button
The LED flashes.
P2 button.
P2 button.
and the transmitter is ready for use.
The LED flashes.
The LED flashes 5x.
