21
III. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece
A
to start the chronograph. Hand
3
allows you to follow the measurement in seconds.
2. To interrupt the measurement, press pushpiece
A
once more. To restart the time measurement, press
pushpiece
A
. This procedure makes it possible to
add several short times.
3. The chronograph is reset to zero by pressing push-
piece
B
, once the final measurement has been stopped.
20
ADJUSTING ADDITIONAL FUNCTIONS
If a totalizer hand does not return to zero normally (after a battery change
or inappropriate handling), proceed in the following manner:
1.
Desynchronized hour totalizer:
with the crown in posi-
tion 2, press pushpiece
A
repeatedly until the hand
returns to the initial position.
2.
Desynchronized minute totalizer:
with the crown in
position 2, press pushpiece
B
repeatedly until the
hand returns to the initial position.
3.
Desynchronized seconds totalizer:
with the crown in
position 3, press pushpiece
A
repeatedly until the
hand returns to the initial position.
4.
Desychronized 1/10th of a second totalizer:
with the
crown in position 3, press pushpiece
B
repeatedly
until the hand returns to the initial position.
A
B
2
3
Summary of Contents for Colt Chronograph II
Page 1: ...COLT CHRONOGRAPH II...
