BREIL CHRONO VD57, Instruction Book

Page: 14 / 84

10
NECESSARY OPERATION AFTER BATTERY CHANGE
When the battery is replaced, the time information stored in the built-in IC and the time
indicated by the hands do not correspond with each other. Before using the watch,
therefore, be sure to reset the hands to the “0” position, following the procedure below.
•
In case any of the hands should move improperly, follow the procedure below to
adjust the hand movement.
F
(Second click)
1. Pull out the crown all the way.
2. Keep “A” and “B” pressed at the same time for 2 seconds, and then release the
buttons. The chronograph second hand turns half a circle counterclockwise and the
returns where it was. The chronograph 1/10 second hand turns a full circle
clockwise and stops.
ChronoVD57_GB 26-09-2003 15:52 Pagina 10