Breguet HERITAGE 5460, Instructions For Use Manual

Page: 6 / 26

8
5460/5461/5469
“H
ÉRITAGE
”
CHRONOGRAPH
,
DATE
,
SELF
-
WINDING
,
WATER
-
RESISTANT TO
30
M
The crown has three positions:
1. Neutral position
2. Rapid date correction
3. Time-setting position
Starting the watch
Crown in position 1 . This position
enables manual winding of the
self-winding movement, meaning
winding by rotating the crown
upwards (
▲ ▲
), about 30 to 35 turns.
Afterwards, when worn on the wrist,
the watch is automatically rewound.
If not worn, it will stop after about
45 hours.
Setting the time
Pull the crown out to position 3 . Turn
the crown upwards (
▲ ▲
) to move the
hands forwards to the date change at
midnight. Then set the watch to the
desired time by moving the hands for-
wards. (Please note: if you set your
watch during the afternoon, you must
first move the hands past noon). For
accurate time-setting, ensure that the
last operation was done in a clock-
wise direction. Then push the crown
back to position
1 . After this opera-
tion, rotate the crown downwards (
▼ ▼
)
to make sure it turns freely.