Breguet 5837, Instructions For Use Manual

Page: 7 / 33

6
5837/5839
“M
ARINE
”
CHRONOGRAPH
,
TOURBILLON
,
MANUALLY WOUND
,
(
ESCAPE WHEEL
,
LEVER AND BALANCE SPRING IN SILICON
)
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
Starting the watch
Crown in position 1 . This position
allows you to wind the movement. To
start the watch, wind it fully by turn-
ing the crown upwards (
▲
) until
resistance is felt. ON NO ACCOUNT
FORCE THE CROWN. When the resis-
tance is felt at the end of winding, it is
important to turn the crown down-
wards (
▼
) (at least
1
/
4
turn) in order
to release the crown wheel. Thereafter,
wind the watch daily, preferably at a
regular time.
Setting the time
Pull the crown out to position 2 . Then
turn the crown upwards (
▲
) to move
the hands forwards to the desired
time. For accurate time-setting, ensure
that the last operation was done in a
clockwise direction. Then push the
crown back to position
1 . After this
operation, rotate the crown down-
wards (
▼
) to make sure it turns
freely.