background image

19

Maintenance

ENGLISH

•  The Power Breezer was designed with easy cleaning in mind. 
•  Once a week drain the 

water tank

 and allow for the 

water tank

 to dry out 

overnight.

•  If the inside of the 

water tank

 becomes slippery/slimy to the touch,  

drain the Power Breezer. You can also clean the 

water tank

 by putting a 

few drops of liquid soap in water and brushing the inside of the 

water tank

 

with it. Rinse the 

water tank

 with a hose, then open the 

drain plug

 at the 

bottom and leave the 

tank lid

 off to allow to air dry.

1. Maintaining the water tank:

If you see a collection of dust or 

debris in the head of the Power 

Breezer, clean the Power Breezer 

with a hose. 

Spray from the front of the fan 

head

. Use a clean cloth to wipe  

it down.
Avoid spraying water directly into 

the 

vent.

2. Maintaining the fan head and motor:

Vent

VI. MAINTAINING YOUR POWER BREEZER

For the best performance and longest life of your Power Breezer, we 

recommend the following maintenance on your Power Breezer every  

30 days

 and 

prior to storing for extended periods of time.

Summary of Contents for POWER BREEZER MACH 4























Reviews: