22
Chapter 4: Assembling the Bed Face Panel unit.
Chapter 4:
Assembling the Bed Face
Panel unit.
REQUIRED TOOLS
Referring to Fig. 4A, lay doors face down in front of the bed
on a soft surface, such as a carpet, rug or blanket. Pre-drilled
“Handle Holes” should be furthest away from bed cabinet.
STEP 1
REQUIRED HARDWARE
• Hardware Package #3
• Hardware Package #7
• Hardware Package #17 (F & Q only)
• Cordless Drill and/or Impact Driver
• 5/16” Socket
• Phillips Screwdriver
• #2 Square Drive Bit
• Tape Measure
• Masking Tape (Optional)
FIG. 4B - DOORS, OVERHEAD VIEW
FIG. 4A
The “
Mechanism End
” is the end
of the bed that will connect to the
Mechanism and the “
Leg End
” is the
end that will connect to the legs.
For video instructions of this specific chapter, visit:
breda.us/frame
