Brecknell PC3060, User Instructions

Page: 19 / 30

PC3060 Price Computing Scale User Instructions 19
2. Press the M+ key to scroll through the backlight settings, AUTO – ON –OFF.
4.1.8 Automatic Unit Price Clear
The PC3060 scale can be set to automatically clear the unit prices once the scale
returns to zero weight.
To activate the Automatic Unit Clear function, press and hold the SAVE key while
turning off the scale.
Now when a unit price is entered and used, once the weight display returns to Zero, the
unit price will automatically be cleared.
To turn off this feature, repeat this process.
4.1.9 Units of Measure
Subject to the markets the PC3060 is to be used in, the UNITS key may be deactivated
so the unit of measure cannot be changed.
In the markets where lb and kg can legally be used, the UNITS key is active.
To change the unit of measure from lb to kg, make sure the scale is at zero. Press the
UNITS key to change weighing unit from lb to kg. The lb annunciator will go out and the
kg annunciator will illuminate.
4.1.10 Accumulation function
The scale can be set to accumulate manually by pressing the M+ key.
To turn on the accumulation functions see the
F11 RS232>mode>tpup
parameter on
page 24 .
To use this feature, the scale needs to have a stable reading and be able to return to
zero; only accumulated weight over 20 divisions can be accumulated.
The values (price) displayed may be added to the accumulated values by pressing the
M+ key. The TOTAL PRICE display will show the total price for two seconds before
reverting to the next item.
Display Description
bLSEt ModE AUto
Backlight will be turned on, only at startup or
when a change in weight is seen on the scale.
Back light will go off after 5 seconds once the
weight becomes stable or at zero.
bLSEt ModE on
Backlight will be always on
bLSEt ModE oFF
Backlight function will be always off
Before entering parameters, press the calibration switch. Switch is located below the
scale and may only be accessed if the scale has not been sealed.