4
III.
Height Rod Installation:
1.
Insert the back side holes of the height rod into the two bolts on the front side of
pillar; loosen the height rod pulling downwards until in correct position. (Fig.4-1)
2.
Use the wrench to tighten the two hex-head screws. Do not over tighten the
screws.
3.
Remove the wrench from the two hex head screws. (Fig.4-3)
Height rod
Wrench
Pillar
Platform
Moving wheel
Frame
Height rod
Wrench
Fig 4.1: Back side hole of the height rod
Fig 4: Height rod installation
Height rod
Wrench
Platform
Flat Frame
Pillar
Fig 4.2
Fig 4.3
Height rod
Pillar
