3
II.
Connect the steelyard rod to long lever (Fig.3):
1.
Lay the pillar on a table (Fig.3)
2.
Disassemble the wires on the levers.
3.
Insert the wrench into the small hole in front of the steelyard rod, and pull the
hook of the steelyard rod with the hook of wrench (Fig. 3.1)
4.
Push the long lever forward, then hook the bearing of the steelyard rod on the
pivot of the long lever (Fig. 3-2)
5.
Take away the wrench form the draft rod (Fig.3-3)
6.
Put the scale on the ground gently
Zoom
Disassemble
the wires
Connect the steelyard to the long lever
Wrench
Steelyard rod hook
Fig 3.1
