GP100 and GP250 User Instructions
13
2.6 Scale Communications
1.
Turn the scale on.
2.
Press and hold the
[TARE]
key for 3-5 seconds. The scale will display
TARE
,
SET
,
VERSION NUMBER
and
UNIT
.
3.
Release the
[TARE]
key when you see
UNITS
on the display
4.
Press the
[UNITS]
key until
Port
on the display.
5.
Press the
[TARE]
key and then press the
[UNITS]
key to toggle to the desired
software protocol.
6.
Once the correct selection is displayed, press the
[TARE]
key to accept.
7.
With
Port
on the display, press the
[UNITS]
key.
Baud rate
will be displayed.
8.
Press the
[TARE]
key and press the
[UNITS]
key to toggle to the desired baud
rate communication setting needed for your software.
9.
Press the
[TARE]
key and press the
[UNITS]
key.
Par
will be displayed.
10.
Press the
[TARE]
key and press the
[UNITS]
key to toggle to desired parity
format.
11.
Press the
[TARE]
key to accept the selection.
Par
is displayed.
12.
Press the
[UNITS]
key and
End
will be displayed.
13.
Press the
[TARE]
key to exit the menu structure.
NOTE: For UPS Worldship software, you will need to select the NCI protocol,
4800 baud rate, 7 even parity in the scale menu configuration. In the actual UPS
software, select the 3835 for type of scale.
Summary of Contents for GP100-USB
Page 15: ......
