Brecknell Scales Configuration Steps to Lock Unit Type
*This configuration is optional to prevent cycling through other Units(KG,Lbs,G,etc.) of measure.
Power on scale by pressing the Red Zero On/Off button
After it boots press and hold the [Hold] and [Zero On/off] buttons for 3 seconds
Next, Confg will show on the screen
Confg
Press the Unit key this will enter you into the configuration menu.
Now you will scroll through these options using the Unit key. Keep pressing the unit key until you reach
the Units screen this is where you will turn On or Off each unit. Press the Unit button 12 times to reach
Units, if you go too far you can use the Hold/Print button to go back a screen.
Press Unit
CF .ON
Summary of Contents for 6710U
Page 3: ...Press unit Reset Press Unit Regul Press Unit PriM N...
Page 4: ...Press Unit PriM D Press Unit Pri Ut Press Unit Secd N...
Page 5: ...Press Unit 10N DSP Press Unit Motion Press Unit Over D Press Unit...
Page 9: ...Press Unit FLter Press Unit Func Press Zero On Off to go back to the Confg Menu...
