background image

10 Technical Specifications

Breas HA 01 Humidifier User Manual

Doc. 004221 En T-2

5.2 Compliance of Standards   

S

TANDARD

S

PECIFICATIONS

IEC 60601-1 (1988)
A1 (1991)
A2 (1995)

Medical electrical equipment - Part 1: General
requirements for safety.

IEC 60601-1-1 (2000)

Medical electrical equipment - Part 1-1: Gen-
eral requirements for safety - Collateral stand-
ard: Safety requirements for medical electrical
systems.

IEC 60601-1-2 (2001)

Medical electrical equipment - Part 1-2: Gen-
eral requirements for safety - Collateral stand-
ard: Electromagnetic compatibility -
Requirements and tests.

IEC 60601-1-4 (2000)

Medical electrical equipment - Part 1-4: Gen-
eral requirements for safety - Collateral Stand-
ard: Programmable electrical medical systems.

IEC 60601-1-6 (2004)

Medical electrical equipment - Part 1-6: Gen-
eral requirements for safety - Collateral stand-
ard: Usability.

ISO 8185 (1997)
C1(2001)

Humidifiers for medical use - General require-
ments for humidification systems.

C

LASSIFICATIONS

S

PECIFICATIONS

Class IIa

Classification according to the European
Medical Device Directive 93/42/EEC.

Class II

FDA classification

Class II (IEC 60601-1) Class
II, Type BF

Electrical equipment with dual isolation and
body floating (isolated) applied part according
to IEC 60601-1.

IPX1

Degree of protection provided by enclosure.

The humidifier and its packaging do not contain any natural rubber latex.

Summary of Contents for HA 01












Reviews: