![background image](http://html1.mh-extra.com/html/breas/clearway-2/clearway-2_service-manual_2806337020.webp)
Service Menu 20
2210.2657 Rev 3.0
NIPPY Clearway 2 Service Manual
.
5.
Attach your flow meter or remove occlusion from the gas flow
analyzer. Fit a 6mm leak port (part no. 00997) to the measurement
device outlet.
6.
Press ‘Start Blower’ [1] and Adjust F1 using corresponding [-] and [+]
buttons [2] until it matches the flow measurement device reading.
Press ‘STOP’ [3] to stop the blower, then press ‘Next’.
NOTE:
With the 6mm leak, the blower will default to a flow of
around -160 L/m, we recommend to calibrate this point. It is only
required to calibrate this one point.
Summary of Contents for Clearway 2
