3. Connect one end of the CPAP
tube to the round end of the tube
adapter. Insert the other end of the
tube adapter into the outlet of the
Z2
as shown.
Connect the other end of the CPAP
tube to the mask. Ensure all con-
nections are tight to avoid air leaks.
If you are using a
Qtube
and
HME
,
the order of pieces are as follows:
PowerShell
, tube adapter, 8” tube,
Qtube
, 4’ tube,
HME
, mask.
4.
Push the start/stop button ( )
to initiate therapy. Push this button
a second time to stop therapy.
Alternatively, the
Z2 Auto
fea-
tures an
Auto On/Off
which starts
therapy when you place the mask
on your face and start to breathe
and stops therapy when the mask
is removed.
NOTE
: It is recommended
that you fully charge the
battery prior to each use.
Instructions on how to
charge the battery follow
in this guide.
