Tilgin HG2751
9
Start box
Check that the following items are included in the start box:
»
1 Router
»
1 Power adapter
»
1 Network cable
Connecting the WAN/broadband connection
Do as follows:
1. Shut down your computer.
2. Connect a network cable between your broadband outlet and the
grey WAN port marked WAN.
3. Plug in the power adapter in the nearest power outlet and connect
the thin cable from the power adapter to the round socket labeled
DC12V and make sure that any of the lights are lit.
4. If not lit, press the ON/OFF-button on the back of the router.
5. The router will start and automatically contact Bredband2 to
update the built in firmware. This may take a while, don’t turn off the
power.
6. When the update is done, the green Power light will be lit.
Note! The router should be placed as high and central as possible in
your home. Avoid placing it in a cupboard or closet as it may degrade
the WiFi-signal. Make sure that it will have adequate ventilation, do
not cover the router or place it in an environment that will lead to
overheating.
This installation guide will help you install your
new router. The router should be connected to
an Ethernet based broadband network.
