Tilgin HG2751
10
Connecting the LAN
1. Connect a network cable
between the yellow network port
(LAN 1-4) and the network port on the
back or side of your computer or the
device you want to connect. If you
have more devices, use LAN2, LAN3
and LAN4.
2. Finally, plug the power adapter into
an electrical outlet and the contact
into the router where it is labeled
DC12V and press the power button on
the back of the router to turn on the
device.
3. Start the computer or the device you
have connected.
4. The Power-, Internet- and WiFi-
lights will shine a constant green on
your router when the installation is
complete.
Connecting the WiFi
1. Make sure that the WiFi light (see
picture labeled ”Front”, WiFi) on your
router is lit green. If it isn’t lit: press
the button labeled WiFi/WPS (see
picture labeled ”Back”) to active WiFi.
2. Search for wireless networks on the
device you want to connect.
3. Compare the list of network
names (SSIDs) with the name shown
on a sticker on the bottom of the
router.
4. Connect by double clicking on the
correct SSID and then enter the
password. This can be found on
the sticker labeled WPA key on the
bottom of the router. The password
must be typed exactly as written, i.e.
uppercase and lowercase letters.
Description of the front panel
Graphics on the front panel:
1. Power
Green light: The power is on, normal
function.
Green flashing light: Updating or
connecting, do not turn off the power.
Red light: Starting. If the red light
persists: contact Bredband2.
Red flashing light: Can’t connect
to internet.
Off: The router has no power.
2. Internet
Green light: Connected to
the network.
Off: Connection to the
network failed.
3. LAN
Green light: Connected to other
devices with a network cable.
Green flashing light: Connected
with a network cable and generating
traffic.
Off: Not connected with a
network cable.
4. WiFi
Green light: WiFi is active.
Green flashing light (slow): Searching
for other devices using WPS.
Green flashing light (short): WPS
connection is working.
Green flashing light (fast):
WPS connection failed.
Off: WiFi is active.
5. USB
Green light: A device is connected
to the USB.
Off: No device is connected to USB.
