BRAYER BR4953, Instruction Manual

Page: 8 / 40

8 EN
• When you use the remote control, direct it to the front
part of the fan body.
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
USING THE FAN
• Place the fan base (1) on a flat, dry and steady
surface.
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Plug the power cord into the mains socket, the on/off
button indicator (9) will light up.
Switching the fan on/off and selecting the airflow
speed
• To switch the fan on, press the button (9) « » on
the control panel (3) or the button (19) « » on the
remote control (18), you will hear a sound signal, and
the fan will switch on at low airflow speed, the symbol
(14) « » will light up on the display (13).
• Pressing the button (17) « » on the control panel
(3) or the button (20) « » on the remote control (18)
you can select the airflow speed, the symbols (14)
«F1, F2, F3» will appear on the display.
• To switch the fan off, press the button (9) « » on
the control panel or the button (3) « » on the remote
control (18). The fan will be switched off.
Fan operation time timer
• To set the operating time of the fan, press the button
(16) «
» on the control panel (3) or the button (22)
« » on the remote control (18), you will hear a sound
signal and the digital symbols (14) on the display
(13) will show the timer operation time «0:0» and the
symbol (10) «
» will appear.
• Press again the buttons (16 or 22) to set the timer
operation time. Timer operation time can be set from 1
hour to 15 hours with 1 hour setting step.
• To switch off the timer, repeatedly press button (16 or
22) until the « » icon (10) on the display (13) goes
out.
Switching the fan body oscillation on/off
• To switch the fan body oscillation on, press the button
(15) «
» on the control panel (3) or the button (23)
« » on the remote control (18), the display (3) will
show the symbol (18) «
», to switch the oscillation
off, press again the button (15) « » on the control
panel (3) or button (23) « » on the remote control