6
EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
•
Use the humidifier at the room temperature from
+10° С to +40°С and
•
relative humidity less than 80%.
•
Unpack the unit and remove all the packaging
materials.
•
Keep the original package.
•
Read the safety measures and operating
recommendations.
•
Check the delivery set.
•
Examine the unit for damages, in case of damage do
not plug it into the mains.
•
Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
USING THE AIR HUMIDIFIER
•
Remove the lid (1) from the reservoir (2) (fig. 1).
•
Fill the water tank (2) with the required amount of
water.
•
Notes:
— if the tap water used is hard, use water
cleaned with household filters or mix tap water with
distilled water in proportion 1:1.
•
Install the lid (1) on the reservoir (2) (fig. 3).
•
Wait till the process chamber (3) is filled with water.
•
Insert the power plug into the mains socket. You’ll
hear a beep.
•
Switch the air humidifier on pressing the button (5)
« », the air humidifier will switch on The humidifier
operating modes will be displayed by the indicators
(4) «
HUM
HUM
Sleep
Sleep
».
•
By repeatedly pressing the button (5) « », select
the humidification intensity level «
», the
mode of maintaining the relative humidity in the room
«
HUM
HUM
» or the night mode «
Sleep
Sleep
».
•
In the mode of maintaining the relative humidity «
HUM
HUM
»,
the humidifier will automatically set the humidification
intensity which is displayed by the indicators (4) «
» depending on the relative humidity in the
room.
•
• The relative humidity in the room is indicated by the
colored illumination of the button (5) « »:
- Orange — low relative humidity;
- Green — relative humidity in the room
corresponds to the humidity installed by default;
- Blue — high relative humidity.
•
By repeatedly pressing the button (5) « », select
the night mode «
Sleep
Sleep
». The humidifier will switch on to
the minimum humidification intensity in night mode,
and the indicator (4) « » will light up.
•
If the water tank (2) is empty, the button (5) « »
lighting will light up red.
