BRAYER BR4880, Instruction Manual

Page: 8 / 44

8 EN
Note: you can install the convection fan heater directly
on the feet (4) (pic. 1) or you can insert the wheels (5)
into the feet (4).
• Turn over the unit and place it on an even steady
surface.
Wall mounting
ATTENTION!
When using the convection fan heater
in the bathroom, position the unit so that the distance
from the nearest faucet is at least 60 cm, and in no case
should splashes of water fall on the body and inside the
body of the unit.
Before drilling holes in the wall, make sure that there
is no electrical wiring or other communications at this
place.
• When mounting the unit on the wall, the distance
from all sides of the unit body to any objects should
be at least 300 mm (pic. 2), the mains socket should
be below the level of the unit body and easy to
access.
• Do not use the feet (4) with the wheels (5) when
mounting the unit on the wall.
• First mark the holes on the wall for the upper
brackets (6) (pic. 3).
• Drill two 8 mm holes in the wall to the required depth.
• Insert the dowels (pic. 3) into the drilled holes and
tighten the fixing screws so that the fixing screw goes
into the bracket (6).
• Align the screw caps with the holes in the upper wall
bracket (6), slide the unit to the left and lower it down,
making sure the convection fan heater hangs evenly
(pic. 4).
• Mark the places for drilling holes on the wall for the
lower brackets (6).
• Remove the unit from the wall.
• Drill 8 mm holes in the wall to the required depth for
the lower brackets (8).
• Insert the dowels into the drilled holes.
• Align the screw caps with the holes in the upper
wall bracket (6), slide the unit to the left and lower it
down, making sure the convection fan heater is fixed
properly on the upper brackets (6).
• Fix the lower brackets (6) with two screws, make
sure that the convection fan heater is fixed properly
on the wall (pic. 5).
USING THE CONVECTION FAN HEATER
• Place the convection fan heater vertically on an even
dry moisture- and thermal-resistant surface, do not
place it horizontally and do not turn it over.
• Use only the feet (4) or insert the wheels (5) in the
feet (4) when placing the unit on the floor.
• Do not place the convection fan heater on soft
surfaces, such as carpets with high pile, sofas or
beds.
• The distance between the convection fan heater and
the furniture should be at least 1 m.