BRAYER BR4263, Instruction Manual

Page: 9 / 48

9 EN
ASSEMBLING THE VACUUM CLEANER
• Install the dust bin on the motor unit of the vacuum
cleaner and make sure that the dust bin is properly
secured with the clamp (6) (pic. 2).
Attaching the extension pipe
• Insert the extension pipe (4) into the vacuum cleaner
air inlet until
• the clamp (5) clicking (pic. 3).
• Connect the electric brush (2) to the extension pipe
(4) (pic. 4).
• To detach the extension pipe (4) from the vacuum
cleaner press and hold the clamp (5).
• To detach the electric brush (2) from the extension
pipe (4) press and hold the clamp (3).
Electric brush
• Use the electric brush (2) for cleaning rooms with
smooth floors or carpets with medium and low pile.
Notes:
– do not use the electric brush (2) if the pile length
exceeds 15 mm.
– do not run the electric brush (2) over electric wires.
– after you finish cleaning the room with the electric
brush (2), switch the vacuum cleaner off with the on/off
button (9).
Сrevice nozzle
• The crevice nozzle (21) is intended for cleaning
radiators, crevices etc.
• You can attach the crevice nozzle (21) to the
extension pipe (4) or to the air inlet of the vacuum
cleaner.
• Use the brush for collecting dust from furniture
smooth surface, the pile prevents the damage of
furniture polished surface. When cleaning move the
brush forward until the clamp clicking.
SWITCHING THE VACUUM CLEANER ON
Attention! Switch the vacuum cleaner on only with
the dust bin (7) installed and with the separator (16)
and the filter block (15) installed in the dust bin.
• During cleaning or when carrying the vacuum cleaner
hold the unit by the handle.
• For easy storing of the vacuum cleaner or the battery
charging use the wall-mounted holder of the vacuum
cleaner (20).
• To switch the vacuum cleaner on press the on/off
button (9). The vacuum cleaner will switch on at the
low power level. To switch the maximal power on,
press the button (12) « » and press the button (9)
again to switch the vacuum cleaner off.